BMW 2011 135i Coupe 业主指南

40

Depending on the vehicle's equipment, press 
one of the buttons labeled

1 or 2 here.

Press the button once per temperature level.
Three LEDs indicate the highest temperature.
To switch off:
Press button longer.
If you continue driving within approx. 
15 minutes, the seat heating is automatically 
activated at the previously set temperature.
The temperature is lowered or the heating is 
switched off entirely to save on battery power. 
The LEDs stay lit.

You can store and call up two different combi-
nations of driver's-seat and exterior-mirror 
positions.
Settings for the backrest width and lumbar sup-
port are not stored in memory.

1.

Switch on radio readiness or the ignition, 
refer to page

.

2.

Adjust the seat and exterior mirrors to the 
desired positions.

3.

Press the 

button.

The LED in the button lights up.

4.

Press the desired memory button 

1 or 2: the 

LED goes out.

Do not call up the memory while you are 
driving; otherwise, unexpected seat 

movement could result in an accident.

<

1.

Unlock and open the driver's door or switch 
on radio readiness, refer to page

.

2.

Briefly press the desired memory button

or 

2.

The adjusting procedure is halted when you 
touch a seat adjustment switch or one of 
the memory buttons.

1.

Close the driver's door and switch the igni-
tion on or off, refer to page

2.

Press the desired memory button

1 or 2 

and keep it pressed until the adjustment 
process has been completed.

If the 

 button was pressed accidentally:

Press the button again; the LED goes out.

Online Edition for Part no. 01 41 2 604 079 - © 02/10 BMW AG