BMW 2009 M5 Sedan 业主指南

下载
页码 266
 41
example, operate the roof and injure them-
selves.
<
Raising
Press the switch. 
The closed glass sunroof is raised and the slid-
ing visor opens slightly.
Do not use force to close the sliding visor 
with the glass sunroof in its raised posi-
tion, otherwise the mechanism will be dam-
aged.
<
Opening, closing
>
Slide the switch back to the resistance 
point. 
The glass sunroof and the sliding visor open 
together for as long as you hold the switch 
in this position.
>
Briefly press the switch back beyond the 
resistance point. 
The glass sunroof and the sliding visor open 
automatically. Briefly pressing the switch 
stops the motion.
In a similar manner, the glass sunroof closes 
when you slide the switch forward. The sliding 
visor remains open and can be closed by hand.
For information on convenient operation via the 
remote control or door lock, refer to page
or
.
For information on comfort closing with comfort 
access, refer to page
.
Opening and closing automatically
Briefly press the switch beyond the resistance 
point.
The following movements are also automatic:
>
Press the switch with the sunroof open: the 
sunroof is raised all the way.
>
When the sunroof is raised, briefly press the 
switch in the opening direction: The sunroof 
is opened all the way.
Briefly pressing the switch stops the motion.
Pinch protection system
If the glass sunroof encounters resistance when 
closing from roughly the center of the roof 
opening or when closing from the raised posi-
tion, the closing action is interrupted and the 
glass sunroof reopens a short way.
Despite the pinch protection system, 
inspect the sunroof's travel path prior to 
closing it, as the safety system might fail to 
detect certain kinds of obstructions, such as 
very thin objects, and the sunroof would con-
tinue closing.
<
Closing without pinch protection 
system
In case of danger from outside, slide the switch 
forward beyond the resistance point and hold. 
The roof closes without the pinch protection 
system.
Following interruptions in electrical 
power supply
After a power loss, the sunroof may only 
respond to the raise command. Then have the 
system initialized. BMW recommends having 
this work done by your BMW center.
Moving manually*
In the event of an electrical malfunction, you can 
move the glass sunroof manually.
Online Edition for Part no. 01 41 2 600 738 - © 08/08 BMW AG