BMW 2009 M6 Coupe 业主指南
101
5.
Change to upper field if necessary. Turn the
controller until "Lighting" is selected and
press the controller.
controller until "Lighting" is selected and
press the controller.
6.
Select "High-beam assistant" and press
the controller.
the controller.
High-beam assistant is switched off.
The setting is stored for the remote control cur-
rently in use.
rently in use.
Instrument lighting
The lighting intensity can be adjusted with the
knurled wheel with the parking lamps/low
beams switched on.
knurled wheel with the parking lamps/low
beams switched on.
Interior lamps
Control of the interior lamps, footwell lamps,
door entry lighting, courtesy lamps
door entry lighting, courtesy lamps
and sill
panel lighting
is automatic.
With the courtesy lamps,
LED lights are pro-
vided in the outside rearview mirrors to illumi-
nate the exterior area around the doors.
nate the exterior area around the doors.
To protect the battery, all lamps in the
vehicle are switched off approx. 15 min-
vehicle are switched off approx. 15 min-
utes after radio readiness is switched off, refer
to Start/Stop button on page
to Start/Stop button on page
<
Switching interior lamps on and off
manually
Press button
1.
If the interior lamps, footwell lamps, door entry
lighting, courtesy lamps and sill panel lighting
are to remain switched off continually, press the
button for approx. 3 seconds.
lighting, courtesy lamps and sill panel lighting
are to remain switched off continually, press the
button for approx. 3 seconds.
Reading lamps
The reading lamps are beside the interior lamp:
You can turn them on and off using buttons
You can turn them on and off using buttons
2
located next to the lamps.
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG