BMW 2007 650i Coupe 业主指南

Under t

208

Change to upper field if necessary. Turn the
controller until "Service requirements" is
selected and press the controller.

Change to the second field from the top if
necessary. Turn the controller until "Engine
oil level" is selected and press the control-
ler. The oil level is displayed.

Possible messages

"Engine oil level O.K."

"No measurement available: Updating
engine oil level measurement...":
Engine oil level is being measured. This
process can take approx. 3 minutes when
stopped on a level surface and approx.
5 minutes while driving.

"Oil level at the minimum! Refill with 1 quart
of engine oil.":
Add 1 US quart/liter of engine oil at the next
opportunity.

"Engine oil level too high":

Have the vehicle checked immedi-
ately; otherwise, engine damage may

result if too much oil has been added.

"Please observe recalculated service inter-
val for engine oil":
Do not add engine oil. Continued driving is
possible. To do this, observe the recalcu-
lated remaining mileage until the next oil
change service, refer to page

210

. Have the

system checked as soon as possible.

Adding engine oil

Do not add 1 US quart/1 liter of oil until a corre-
sponding message is shown on the Control Dis-
play.

Add oil within the next 125 miles/200 km,
otherwise the engine could be dam-

aged.

Continuous exposure to used oil has
caused cancer in laboratory testing.

For this reason, thoroughly wash exposed areas
of skin with soap and water after such work.
Keep oil, grease, etc. out of reach of children
and observe warnings on containers. Failure to
do so could pose health risks.

Oil change

Have oil changes carried out only by a BMW
center or a repair shop that works in accordance
with BMW guidelines and uses appropriately
trained personnel.

Approved engine oils

The quality of the engine oil selected has critical
significance for the operation and service life of
an engine. BMW continuously approves spe-
cific oils after confirming their suitability for use
in its vehicles with extensive testing.
Use only approved BMW High Performance
Synthetic Oil.
If BMW High Performance Synthetic Oil is
unavailable, you can add small quantities of
other synthetic oils between oil changes. Use
only oils of the specification API SH or higher.

Your BMW center will be happy to answer
detailed questions on BMW High Perfor-

mance Synthetic Oil or approved synthetic
oils.