Bryston SP 1.7 用户手册

下载
页码 6
Source Selection
: Accomodates 11 sources, up to 4
of which may be digital inputs 
Digital Inputs
:  4 coaxial S/PDIF (RCA), 2 of which
may be assigned to optical S/PDIF (TOSLINK)
Digital Inputs (Pro model)
: 1 AES/EBU, 4 coaxial
S/PDIF
(RCA)
Stereo Analog Inputs
: 6 stereo pairs (RCA) 
Discrete 5.1 Analog Inputs
: 6 unbalanced (RCA) for
Left, Centre, Right, Right Surround, Left Surround,
and Subwoofer 
Main Audio Outputs
: 6 unbalanced (RCA) and 6 bal-
anced (XLR) for Left, Right, Centre, Right Surround,
Left Surround, and Subwoofer 
Additional Outputs for ES/EX 6.1/7.1
: Left Rear, Right
Rear (RCA)
Audio Record Outputs
: 2 stereo (RCA) pairs from any
analog input
Frequency Response
: 20Hz to 20kHz +/- 0.25 dB
THD & Noise
(20Hz to 20kHz at 3V output level): Less
than 0.006% in all modes; below 0.0025% in Bypass
mode.
Signal-to-Noise Ratio
: Not less less than 100dB in all
modes; 110dB in Analogue Bypass Mode (Ref. 1V
input, maximum gain, 22kHz bandwidth).
Input Level
: maximum 2 Vrms in DSP modes, 4Vrms
in Bypass Mode
Output Level
:  8 Vrms (16 Vrms Balanced) in DSP
Modes; 10 Vrms (20 Vrms Balanced) in Bypass Mode
Output Impedance
: 110 Ohms
D/A, A/D Conversion
: Crystal Semiconductor 24-Bit
Delta-Sigma
DSP Engine:
Motorola
Bass Management
: 2nd Order high-pass filter (x5),
4th Order low-pass filter; Crossover Frequencies 60,
70, 80, 90, 100, 110, or 120 Hz
Display
: Two-line, 16-alphanumeric characters per
line, black-on-green
Trigger Outputs
: One 12V on/off trigger; one 12V
programmable
Power Requirements
: 100VAC, 115VAC, and
230VAC models
Remote Functions
: Power, master volume, source
switching, mode switching, mute, and trims (in test
mode)
Control Port
: RS-232 (bidirectional, D9 connector)
port for integration of external control systems (AMX,
Crestron, and others using character-based proto-
cols), and for control of external video switchers
Aux. Infrared Receiver Input
: Mini-phone jack
XLR
Configuration
: Pin 1 ground, pin 2 positive, pin
3 negative
Front Panel
: Silver or Black; 17”-wide for shelf
mounting or 19” rack panel (2 RU, 3.5”/8.9cm.
high)
Weight
: Approx. 22 lbs (10 kg)
Dimensions
(including rubber feet): 
Shelfmount 17”x13.5”x3.8”, 43.2cm. x 34.3cm. x 9.7cm.
Rackmount 19”x13.5”x3.8”, 48.3cm. x 34.3cm. x 9.7cm.
Canada’s largest independent manufacturer of high-end audio electronics 
for consumers and professionals. Founded 1962. Visit our website:
www.bryston.ca
• Audiophile sound quality and construction: all analog
gain blocks are fully discrete; premium components and
hand-matched transistors used throughout; two sepa-
rate independent linear power supplies with toroidal
transformers isolate analog and digital circuitry pre-
venting crosstalk or interference.
• Easy to use — automatically detects input signal bit-
stream type and adjusts mode. LCD window shows
decoding and signal information and error messages;
LED
indicators show button selections. Clean uncluttered
control layout.
• Flexible input management: select from 11 sources,
including 6 digital and 1 with discrete analog 5.1 input.
Toggle button switches easily between digital and ana-
log inputs.
• 6 Balanced (XLR) outputs.
• 6.1 and 7.1 channel RCA outputs for Surround EX™ and
DTS - ES modes.
• Stereo and Mono down-mixing options for all surround
modes.
• Digital bass-management modes for all speaker setups.
• Bass redirection modes for any speaker set-up.
• Dynamic-limiting for late-night enjoyment of Dolby
Digital, DTS.
• Music  DSP modes: Natural, Club, Stadium, Hall,
Theatre, Church.
• Party mode (5-channel summed mono distribution for
even room-coverage) and 5-channel Stereo option
(stereo fed to front & rear).
• Easy set-up — LCD window provides built-in menus for
speaker setup, and trim and delay adjustments, and dis-
plays error messages. Built-in test-signal generator and
test sequencer makes calibration simple.
• Individually adjustable trims and delays for each chan-
nel. Level trims may also be fine tuned using the remote.
• Each input can have preferred mode saved.
• Integrates with external control systems (AMX, Crestron,
and others).
• Control port for external video switchers including the
Bryston SPV-1.
• Two 12-volt trigger outputs.
• Standby Power Mode allows remote power up.
• Designed for easy upgrading to future formats.
• Hand assembly.
• Tight quality control: 100-hour test and “burn-in” 
• Rugged reliable construction.
• 20-year unlimited transferrable warranty.
Surround Processor 
5.1, 6.1, 7.1
Processes Dolby, DTS, THX, and PCM formats: Dolby
Digital, Dolby Pro Logic and Pro Logic II, DTS-ES
Discrete 6.1, DTS-ES Matrix 6.1, DTS Neo:6, THX
Surround EX™, THX Ultra certified, PCM 32kHz, 44kHz,
48kHz
, 96kHz sample rates.
Audiophile Stereo Preamplifier
Digital-bypass pure analog circuit path
Digital/Analog Multichannel Preamplifier 
Home Theatre Control Center
5.1 analog direct pass-through for DVD-Audio Players
DSP Processor
Ambient Surround for music
Stereo 24/96 D/A Converter
For high-bit PCM audio
20
-Y
EAR
W
ARRANTY
Unlimited, unprecedented, unequaled
Hand-held, 
30-button, infrared
remote control
contains a tilt switch
and photosensor that
automatically
backlights the keys
when it is picked 
up in a darkened
room.
20
-Y
EAR
W
ARRANTY
Unlimited, unprecedented, unequaled
SP 1.7  Technical Specifications
SP 1.7 Key Features
Bryston Limited P.O. Box 2170, 677 Neal Drive, Peterborough, Ontario Canada K9J 7Y4  1-800-632-8217
H o m e   T h e a t e r
P r o c e s s o r / P r e a m p l i f i e r