BMW 2015 M4 Coupe 业主指南
Do not use Launch Control during the break-in,
refer to page
refer to page
Requirements
Launch Control is available when the engine is
warmed up, that is, after uninterrupted driving
of at least 6 miles/10 km.
To start with Launch Control do not steer the
steering wheel.
warmed up, that is, after uninterrupted driving
of at least 6 miles/10 km.
To start with Launch Control do not steer the
steering wheel.
Activate Launch Control
1.
Deactivate Dynamic Stability Control, refer
to page
to page
2.
Select Sequential mode with gear 1 and
driving program 3.
driving program 3.
3.
With the engine running, apply the brake
with the left foot.
with the left foot.
4.
Fully depress the accelerator pedal.
The starting engine speed adjusts.
A flag symbol appears in the instrument
cluster.
The starting engine speed adjusts.
A flag symbol appears in the instrument
cluster.
5.
If necessary, change the starting engine
speed by 500 rpm via cruise control.
speed by 500 rpm via cruise control.
6.
Release the brake, the vehicle accelerates.
Continue to depress the accelerator pedal.
Upshifting occurs automatically as long as
the accelerator pedal is fully depressed.
Continue to depress the accelerator pedal.
Upshifting occurs automatically as long as
the accelerator pedal is fully depressed.
Launch Control is available again only after a
certain distance has been driven.
certain distance has been driven.
System limits
This transmission has an overheating protec‐
tion mechanism, which protects the clutch
from extreme stress.
tion mechanism, which protects the clutch
from extreme stress.
▷
Indicator lamp lights up yellow:
transmission too hot.
Avoid high engine stress and fre‐
quent starts.
transmission too hot.
Avoid high engine stress and fre‐
quent starts.
▷
Indicator lamp lights up red: transmission
is overheating.
Further driving at a moderate pace is pos‐
sible. At the next opportunity, stop the car,
is overheating.
Further driving at a moderate pace is pos‐
sible. At the next opportunity, stop the car,
shut off the engine and allow the transmis‐
sion to cool down.
sion to cool down.
Avoid fast starts, and on inclines did not accel‐
erate lightly while letting the clutch slip; other‐
wise, the transmission may overheat.
During traffic jams or at very low speeds, use
the Low Speed Assistant, refer to page
erate lightly while letting the clutch slip; other‐
wise, the transmission may overheat.
During traffic jams or at very low speeds, use
the Low Speed Assistant, refer to page
M Driving Dynamics Control
The concept
The M Driving Dynamics Control affects the
response of the vehicle to accelerator pedal
movements.
response of the vehicle to accelerator pedal
movements.
Programs
Response behavior options:
▷
"Efficient": efficient, comfortable. Minimal
fuel consumption.
Ideal e. g. in city traffic or on snow.
fuel consumption.
Ideal e. g. in city traffic or on snow.
▷
"Sport": sporty, dynamic.
▷
"Sport Plus": spontaneous, direct. Maxi‐
mum dynamics.
mum dynamics.
Selecting a channel
Via M Drive
On the Control Display:
1.
"Settings"
2.
"M Drive 1" or "M Drive 2"
3.
Select the symbol.
4.
Select the desired channel.
When M Drive is active, setting is immedi‐
ately applied.
When M Drive is active, setting is immedi‐
ately applied.
To activate M Drive with the selected settings,
press the corresponding button on the steer‐
ing wheel:
press the corresponding button on the steer‐
ing wheel:
▷
Seite 74
Controls
Driving
74
Online Edition for Part no. 01 40 2 960 786 - II/15