Brother MFC-9070 用户手册

Insert the document face down in the ADF.

Press Search/Speed Dial, then press # and the two-digit Speed Dial number.

Press Fax Start.

You can search for names you have stored in One Touch (FAX-8070P) and Speed Dial 
memories. (See Storing One Touch Dial Numbers (For FAX-8070P Only), page 21 and Storing 
Speed Dial Numbers, page 22.)

Insert the document face down in the ADF.

Press Search/Speed Dial, then enter the first letter of the name you’re looking for.

Press 

 or 

 to search the memory that are stored alphabetically.

When the screen displays the name you want to call, press Fax Start.

You can store very long dialling sequences by dividing them and setting them up as One Touch (for 
FAX-8070P only) and Speed Dial numbers. Then while dialling, you can combine two or more One 
Touch and/or Speed Dial numbers and even include manual dialling using the dial pad. You can use 
these numbers in any combination. The combined number will be dialled, in the order you entered 
it, as soon as you press Fax Start.

For example:

For the FAX-8070P, you can store “555” on One Touch Dial key 01 and “7000” on One Touch Dial 
key 02. If you press One Touch 01, 02 and Fax Start, you can dial “555 7000”. To temporarily 
change a number, you can substitute part of the number with manual dialling using the dial pad. So, 
if you press One Touch 01 and press 7001 using the dial pad, you can dial “555 7001”.

For the FAX-8070P, MFC-9030 and MFC-9070, you can store “555” on Speed Dial #01 and “7000” 
on Speed Dial #02. If you press Search/Speed Dial, #, 0, 1, Search/Speed Dial, #, 0, 2 and 
Fax Start, you can dial “555 7000”. To temporarily change a number, you can substitute part of the 
number with manual dialling using the dial pad. So, if you press Search/Speed Dial, #, 0, 1 and 
press 7001 using the dial pad, you can dial “555 7001”.

Using access codes is easy. Sometimes you may want to choose from the among several long 
distance carriers when you make a call; rates may vary depending upon the time and destination. To 
take advantage of low rates, you can store the access codes or long-distance carriers as One Touch 
and Speed Dial numbers.

If you try to use a One Touch or Speed Dial location with no number stored in it, 
you hear a warning sound, and screen displays NOT ASSIGNED. The display 
returns to normal after 2 seconds.

You can also use 

 or 

 key to search the numbers you have stored in 

memory in numerical order. In that case, do not enter the first letter of the name in 
Step 2.