Britax ROUNDABOUT 55 用户手册

Before You Begin:

• Check that your vehicle has lower anchors.

* Refer to your vehicle owner’s manual or contact the vehicle

manufacturer for the maximum weight rating for their

lower anchors. Use vehicle belt (not lower connectors) for

installations with children who weigh more than the vehicle

lower anchor limit. Unless specified otherwise by the vehicle

manufacturer, assume a 40 pound (18.1 kg) child is the vehicle

lower anchor limit.

• Remove the lower connectors from the storage slots in the

base. Press the adjuster release button and pull the lower

connector strap to full length. Repeat for the second strap.

• Remove the Versa-Tether from the pouch and place it up

and over the child seat back.

* Britax recommends that the Versa-Tether is used at all times.

Using the tether will improve the stability of the child seat and

reduce the risk of injury. Check your vehicle owner’s manual for

tether anchor locations. Only attach the Versa-Tether to anchor

points designated to the chosen seating position as indicated

by your vehicle owner’s manual.

• This child seat must be in position 1 or 2 and placed

forward facing on the vehicle seat.

* Ensure that no more than 20% or 3 inches (7.6 cm) of the base

hangs over the edge of the vehicle seat. See page 23 for more

information.

LATCH Installation

Forward-Facing Installation