Britax BOULEVARD 70 用户手册

1 Loosen the harness.

a Lift harness adjuster lever
b Pull both harness straps forward

2 Remove the body pillow,

unbuckle the harness, and

remove the belly pad.

3 Pull the head restraint cover up,

then pull the seat cover forward

while pulling the buckle through to

access the rear-facing belt path.

IMPORTANT:

Ensure buckle is in

inner slot and lying away from the belt

path.
4 Open the blue lock-off closest

to where the vehicle belt will be

buckled.

a Open the locking tab
b Open the clamp

5 Route the vehicle belt through the

rear-facing belt slots, then buckle.

Ensure the vehicle belt is not

twisted.

6 Push down into the middle of the

child seating area with moderate

force while removing all slack from

the bottom (lap) part of the vehicle

belt and close the lock-off.

a Close the clamp over the vehicle belt
b Slide your palm or thumb along the

locking tab until a click is heard (see

page 19)

7 Push the child seat down while

pulling the top (shoulder) part of

the belt between the belt slots

to remove any remaining slack

through the lock-off.

LOCKING

TAB

CLAMP

Rear-Facing Installation