Brady X-Plus II 用户手册

Handling the Printer

1/11/07

X-Plus II User Guide

14068L-001 Rev. A

This section describes how to handle your printer.

When you receive the printer, immediately unpack it and inspect for shipping damage. 

• Save all packing materials.

• Check all exterior surfaces for damage.

• Raise the media door, and inspect the media compartment for damage to components.

If you discover shipping damage upon inspection:

• Immediately notify the shipping company and file a damage report.

• Keep all packaging material for shipping company inspection.

• Notify your authorized Brady distributor.

If you are not placing the printer into immediate operation, repackage it using the original 
packing materials. You may store the printer under the conditions shown in 

If you must ship the printer:

• Remove any media or ribbon from the printer to avoid damaging the printer.

• Carefully pack the printer into the original container or a suitable alternate container to 

avoid damage during transit. A shipping container can be purchased from Brady if the 
original packaging has been lost or destroyed.

This printer is recyclable. If you must dispose of the printer, do not do so in 
unsorted municipal waste. Please recycle according to your local standards.

Brady Corporation is not responsible for any damage incurred during the 

shipment of the equipment and will not repair this damage under warranty.

–40°F to 140°F (–40° to 60°C)

5% to 85% non-condensing