Brady 200M 用户手册
FEED Key and CANCEL Key Test
This test prints seven pre-programmed label formats at different
speeds. The printer automatically pauses after each format. The
sequence of label formats is as follows.
speeds. The printer automatically pauses after each format. The
sequence of label formats is as follows.
Extended Printer Diagnostics
Extended diagnostic tests are available. The maintenance manual
provides the information needed to perform these additional tests.
provides the information needed to perform these additional tests.
Battery Replacement
(200M Only)
One of the factory-installed options for the 200M is the Battery
Backed-up 256 KB Non-volatile SRAM Memory. The battery
used with this option is a 3 VDC lithium battery.
Backed-up 256 KB Non-volatile SRAM Memory. The battery
used with this option is a 3 VDC lithium battery.
It is recommended that a qualified service technician replace this
battery since it requires internal access to the electronics area of
the printer. Further information regarding the replacement of this
battery is contained in the Maintenance Manual, Vol. 1: General
Maintenance.
battery since it requires internal access to the electronics area of
the printer. Further information regarding the replacement of this
battery is contained in the Maintenance Manual, Vol. 1: General
Maintenance.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries
according to the manufacturer’s instructions.
replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries
according to the manufacturer’s instructions.
Label Format
Qty
Speed
Left Ribbon Wrinkle Test
20
D
Right Ribbon Wrinkle Test
20
D
C39 Wrinkle Test
20
D
Left Ribbon Wrinkle Test
20
A
Right Ribbon Wrinkle Test
20
A
C39 Wrinkle Test
20
A
Usable Area Test
10
D
Label Format
Qty
Speed
Head Temperature Test
10
D
Upper Smear Test
10
D
Lower Smear Test
10
D
Usable Area Test
10
A
Head Temperature Test
10
A
Upper Smear Test
10
A
Lower Smear Test
10
A
O
p
er
at
io
n
M-Series User s Guide
Operation
3-11