Bowflex Ultimate 2 业主指南

a.   Uncoil the Cable from Lower Pulley and remove the

Ball Stop. (See Step 1/Figure A)

b.   In Box 4, locate a Single Pulley Assembly with one

Cheek. Wrap the Cable under the Pulley and feed the

Cable through the hole in the Rod Box. (See Figure A) 

     

c.  Install the Single Pulley (See Figure B) making sure

the cable is between the Pulley and the small Metal

Post on the Pulley Bracket.

       (See Top View of Angled Pulley)

d.   Feed the Cable through the lower half of the Floating

Pulley Assembly.

• Hex Key (7/32”)