Bowflex Power Pro 业主指南
Step 5:
Position your Chest Bar upright and insert
to the machine frame where you just
removed the U-Bar.
to the machine frame where you just
removed the U-Bar.
Step 6:
Line up holes on machine and Chest Bar.
Using the nuts and bolts that you previously
removed in Step Two, attach Chest Bar
to machine frame. Tighten securely.
Using the nuts and bolts that you previously
removed in Step Two, attach Chest Bar
to machine frame. Tighten securely.
Step 7:
Replace the Vertical Main Frame with Rod
Pack that you removed in step two. Secure
with bolts that were set aside.
Pack that you removed in step two. Secure
with bolts that were set aside.
Step 8:
Find existing pulley on U-Bar that you
removed. They are connected to frame
using a J-Bolt and a Nylon Lock Nut.
Remove nut from bolt. When finished
simply pull up J-bolt to remove.
removed. They are connected to frame
using a J-Bolt and a Nylon Lock Nut.
Remove nut from bolt. When finished
simply pull up J-bolt to remove.
Remove Nylon
Lock Nut
Lock Nut
16
Note:
Once you finish installing your chest
bar, go back to page 8, step 4 and continue
assembling your Bowflex.
assembling your Bowflex.
Components for this assembly
are in a box labeled
Chest Bar Attachment