Boss Audio Systems BR-900CD 用户手册
175
Section 7
With Macintosh
Backing Up the BR-900CD’s Data
1. Connect your computer and the BR-900CD with a USB
cable.
2. Confirm that the recorder is stopped, then press
[UTILITY].
3. Press CURSOR [
] [
] to move the cursor to “USB,”
and press [ENTER].
The USB screen appears.
4. Select “BACKUP” with the TIME/VALUE dial, then
press [ENTER].
The Idling screen appears in the display.
fig.06-106d
* You cannot carry out the following procedure unless the Idling
screen is displayed. Refer to p. 212 for instructions on
resolving this problem.
resolving this problem.
The “BOSS_BR-900” icon is added to the computer.
fig.06-107
5. Back up the data.
1)
Double-click the “BOSS_BR-900” icon.
2)
Drag the “ROLAND” folder to the computer’s
folder and drop it in the folder.
fig.06-109d
When you have finished backing up the data, the Idling
screen returns to the display.
screen returns to the display.
6. Quit the connection to the computer.
1)
Drag the “BOSS_BR-900” icon into the trash.
7. Press the BR-900CD’s [EXIT].
The USB screen returns to the display.
* If you press [EXIT] without quitting the connection to the
computer, the following screens appear. In this case, pressing
[ENTER] returns the USB screen to the display.
[ENTER] returns the USB screen to the display.
fig.06-106ad
8. When backup of the data is complete, press [EXIT] to
return to the Play screen.
At this point, you can safely disconnect the USB cable
from the BR-900CD and the computer.
from the BR-900CD and the computer.
BOSS_BR-900
(Ex.)
Reading backup data back into the BR-900CD from
PC (Recover)
When restoring data backed up on a computer to the BR-
900CD, drag the “ROLAND” folder to the “BOSS_BR-
900” icon and drop it there (overwriting it).
900CD, drag the “ROLAND” folder to the “BOSS_BR-
900” icon and drop it there (overwriting it).