Biostar M6VLQ Grand 业主指南
9
1
3
Pin 2-3 close
+5V Standby
Voltage
PS/2 Mouse and PS/2 Keyboard are
powered with +5V standby v oltage
Note: In order to support this function “Pow er-on the system via keyboard
and mouse”, “JKBV1” jumper cap should be placed on pin 2-3.
and mouse”, “JKBV1” jumper cap should be placed on pin 2-3.
Power S ource Selection for USB: JUSBV1/ JUS BV2
JUSBV1/JUSBV2 Assignment
Description
1
3
Pin 1-2 close
+5V
JUSBV1: 5V for USB connectors
located at the JUSBLAN1 connector
port
JUSBV2: 5V for USB connectors
located at the JUSB1/2 connector ports
1
3
Pin 2-3 close
+5V Standby
Voltage
JUSBV1: JUSBLAN1 port powered with
standby v oltage of 5V
JUSBV2: JUSB1/2 ports powered with
standby v oltage of 5V
Note: In order to support this function “Pow er-on the system via USB
devices”, “JUSBV1/ JUSBV2” jumper cap should be placed on pin 2-3
respectively.
devices”, “JUSBV1/ JUSBV2” jumper cap should be placed on pin 2-3
respectively.
Clear CMOS Jumper: JCMOS1
JCMOS1 Assignment
1
3
Pin 1-2 Close
Normal Operation (default)
1
3
Pin 2-3 Close
Clear CMOS Data