Benq W5000 用户手册
13
Positioning your projector
Eng
lish
lish
How to determine the position of the projector for a given screen size
1.
Determine the aspect ratio of your screen, 16:9 or 4:3?
2.
Refer to the table and find the closest match to your screen size in the left columns labelled
"Screen
Dimensions"
. Using this value, look across this row to the right to find the corresponding average distance
from screen value in the column labelled
"Average"
. This is the projection distance.
3.
Decide the exact height of your projector according to the position of your screen and the adjustable
vertical lens shift range.
vertical lens shift range.
For example, if you are using an 120-inch, 4:3-aspect-ratio screen, please refer to
"4:3 (standard) ratio screen
dimension table"
. The average projection distance is 495 cm.
How to determine the recommended screen size for a given distance
This method can be used for situations where you have purchased this projector and would like to know what
screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1.
screen size will fit in your room.
The maximum screen size is limited by the physical space available in your room.
1.
Determine the aspect ratio of your screen, 16:9 or 4:3?
2.
Measure the distance between the projector and where you want to position the screen. This is the
projection distance.
projection distance.
3.
Refer to the table and find the closest match to your measurement in the average distance from screen
column labelled
column labelled
"Average"
. Check that your measured distance is between the min and max distances listed
on either side of the average distance value.
4.
Using this value, look across that row to the left to find the corresponding screen diagonal listed in that row.
That is the projected image size of the projector at that projection distance.
That is the projected image size of the projector at that projection distance.
For example, if you have a 16:9-aspect-ratio screen and your measured projection distance was 4.5m (450cm),
please refer to
please refer to
"16:9 (widescreen) ratio screen dimension table"
. The closest match in the
"Average"
column is 449
cm. Looking across this row shows that an 100-inch screen is required.
If you place the projector in a different position (to that recommended), you will have to tilt it down or up to
center the image on the screen. In these situations, some image distortion will occur. Use the Keystone function
to correct the distortion. See
If you place the projector in a different position (to that recommended), you will have to tilt it down or up to
center the image on the screen. In these situations, some image distortion will occur. Use the Keystone function
to correct the distortion. See
"Correcting picture distortion" on page 23
for details.
W20000-en.book Page 13 Monday, October 22, 2007 3:35 PM