Benq Projector SH940 业主指南

40 

Using the projector  

En

glish

Your projector is capable of displaying pictures simultaneously from two input sources, which can be used 
to enhance your presentation in an interesting way. Ensure the signals you want to display are correctly 
connected to the projector.

To display the PIP window:
1. Press MENU on the projector or MENU/EXIT on the remote control, and then press  /  until 

the Display menu is highlighted.

2. Press  

to 

highlight 

PIP and press ENTER. The PIP page is displayed.

3. Highlight PIP and press  /  to select On.
The projector will select two currently active signals to display and the last viewed picture will be 
displayed on the big screen as a main source.

The PIP function is effective at below source combinations.

4. To change the Main Source or Second Source, press   to highlight Main Source or Second 

Source and press ENTER. The source selection bar is displayed.

5. Use  /  to highlight the source you want to display for the main (bigger) or second (smaller) 

window, and press ENTER to save the setting and go back to the PIP page.

6. To make OSD settings to one of the two sources (main or second), highlight Active Window and 

press  /  to select the source you want to make adjustments.

7. To change the position of the smaller picture, highlight Position and 

press  /  repeatedly until a suitable position is selected.

8. To resize the small picture, highlight Size and press  /  to set the 

PIP size among Small or Large.

9. To save the settings and leave the OSD menu, press MENU on the 

projector or MENU/EXIT on the remote control.

CVBS

HDMI 1/2

V

Component 1/2

V

Computer 1/2

V

SH940_EN.book  Page 40  Wednesday, October 3, 2012  2:36 PM