Benq MP510 用户手册
Operation
35
Picture menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
value)
DESCRIPTION
Picture Mode
(PC: Dynamic;
YPbPr/S-Video/
Video: Standard)
YPbPr/S-Video/
Video: Standard)
Pre-defined modes are provided so you can optimize your projector
picture set-up to suit your program type.
picture set-up to suit your program type.
You can use the remote control MODE button to select a predefined
Picture Mode. See
for details.
Wall Color
(Off)
Correct the projected picture’s color when the projection surface is not
white.
white.
Color
Temperature
Temperature
(depends on the
selected Picture
Mode)
selected Picture
Mode)
There are four color temperature settings available.
See
for details.
Brightness
(depends on the
selected input
source)
selected input
source)
Adjusts the brightness of the picture.
See
for details.
Contrast
(depends on the
selected input
source)
selected input
source)
Adjusts the degree of difference between dark and light in the picture.
See
Color
(depends on the
selected input
source)
selected input
source)
Increases or decreases the color intensity of the picture.
Tint
(50)
Adjusts the color tones of the picture. The higher the value, the more
reddish the picture becomes. The lower the value, the more greenish the
picture becomes.
reddish the picture becomes. The lower the value, the more greenish the
picture becomes.
When a Video or S-Video signal is connected, the function is only
available with NTSC system selected.
Sharpness
(15)
Adjusts the picture to make it look sharper or softer.