Belkin F1DP116SEA 用户手册
29
section
Serial Ports
In order to terminate a telnet/SSH/RawTCP session in terminal-server mode, you may
use these three control-key sequences (Ctrl-Z / Ctrl-X / Ctrl-C).
use these three control-key sequences (Ctrl-Z / Ctrl-X / Ctrl-C).
Dial-in Modem Mode
In this mode, the Console Server assumes an external modem is attached to the serial
port and waits for a dial-in connection from a remote site. When a user dials in using
a terminal application, the Console Server will accept the connection and display the
appropriate prompt or menu for the user that logged in.
In this mode, the Console Server assumes an external modem is attached to the serial
port and waits for a dial-in connection from a remote site. When a user dials in using
a terminal application, the Console Server will accept the connection and display the
appropriate prompt or menu for the user that logged in.
Serial-to-Serial Mode
Please refer to the “Serial-to-Serial Function” section on page 34 for details for this
mode.
Please refer to the “Serial-to-Serial Function” section on page 34 for details for this
mode.
Serial-Port Parameters
To connect the serial device to the Console Server’s serial port, the serial-port
parameters of the Console Server should match exactly to the requirements of the
attached serial device.
To connect the serial device to the Console Server’s serial port, the serial-port
parameters of the Console Server should match exactly to the requirements of the
attached serial device.