Behringer DSP8024 用户手册

下载
页码 36
23
ULTRA-CURVE PRO DSP8024
musicians—their hearing will recover sensitivity during a pause—the end result is that you recover valuable
headroom.
If you are repeatedly using the same monitor loudspeakers, you can save the EQ settings which you have set
for these speakers (store them under names such as wedge 15" or drumfill). Extremely low frequencies should
be filtered out to avoid a “muddy” stage sound.
+
Set the shelving tool to give you a high pass filter. (Set the shelving slope in EQ SETUP to 12 to
18 dB/oct.) By using the horizontal cursor keys you can easily change the cut-off frequency for
the high pass filter, to enable you to rapidly tailor the monitor sound to suit the program being
reproduced.
If you have a large system with a separate monitor mix and more than four independent monitor submixes, we
recommend the use of one ULTRA-CURVE PRO solely as an analyzer. The next figure gives an example for
the use of several ULTRA-CURVE PRO in a multiway monitor application.
The AFL output from the monitor mixing desk is normally used to feed a loudspeaker at the mixing position.
You can feed this output through the analyzer line input. The ULTRA-CURVE PRO will then switch its display
from microphone to line, and the output signal from the AFL will be present at the line input to be analyzed.
Fig. 3.3: Several ULTRA-CURVE PRO in a multiway monitor application
3.3 Using the ULTRA-CURVE PRO in  the recording studio
There are countless uses for the ULTRA-CURVE PRO in the studio. The only limits are those set by your own
imagination. Here are a few examples:
As the equalizer for the studio monitor system. In addition to the usual graphic EQ use, you can use the
parametric filters to eliminate narrow band room resonances, standing waves etc.
As mastering equalizer. By using the STEREOLINK function you need only set one channel of the equalizer to
achieve the desired EQ setting. The parametric filters are also very useful for this purpose. By using the
optional AES/EBU digital inputs and outputs you can treat material working solely in a digital environment.
+
The STEREOLINK function does not apply to the parametric filters!
As a sound tool for any purpose. If you are working with a sequencer, you can program the equalizer, via MIDI,
to give you a “moving EQ” automation - you can control individual graphic faders, and store their movements per
MIDI, enabling you to reproduce the EQ mix settings at any time.
3.4 The ULTRA-CURVE PRO as a delay unit
In a large sound installation loudspeaker systems are often placed a considerable distance away from the
stage, or are suspended at a height (flown), in order to give those sections of the audience further away from
3. APPLICATIONS