Behringer DSP8024 用户手册
27
ULTRA-CURVE PRO DSP8024
to one of the A/D converter inputs. Switching onto a particular input can be carried out in the RTA or RTA SETUP
menu. The digital input signal goes straight through the transformer balanced input directly to the DSPs (applicable
only when the AES/EBU option is installed). Switching between the analog and digital input sources is done in
the SETUP menu. Signal processing is accomplished by the two DSPs. They are succeeded by the D/A converters,
which reconstruct the left and right analog signals. Finally, they are sent to the electronically balanced outputs.
In the case of an ULTRA-CURVE PRO with fitted AES/EBU option, the digital signal, on leaving the DSPs, will be
sent to the digital output, as well as to the D/A converter. The digital output is transformer balanced, providing a
transmission in the digital domain free of induced hum and noise.
menu. The digital input signal goes straight through the transformer balanced input directly to the DSPs (applicable
only when the AES/EBU option is installed). Switching between the analog and digital input sources is done in
the SETUP menu. Signal processing is accomplished by the two DSPs. They are succeeded by the D/A converters,
which reconstruct the left and right analog signals. Finally, they are sent to the electronically balanced outputs.
In the case of an ULTRA-CURVE PRO with fitted AES/EBU option, the digital signal, on leaving the DSPs, will be
sent to the digital output, as well as to the D/A converter. The digital output is transformer balanced, providing a
transmission in the digital domain free of induced hum and noise.
Fig. 5.1: Block diagram of the ULTRA-CURVE PRO hardware
5.2 EQ mode
DSP 1 sends the unprocessed audio signal for the right channel to the second DSP, and processes the signal
for the left channel.
for the left channel.
Fig. 5.2: Block diagram of the ULTRA-CURVE PRO software in equalizer mode
5. ULTRA-CURVE PRO STRUCTURE