Bay Technical Associates 350 用户手册
Using the Console Interface
893-00992-B
3-49
Table 3-16 describes the Software Download screen fields.
LED Indications During the Download Process
The software download process is automated so that once initiated, it runs to
completion without user intervention. The download process erases the contents
of flash memory and replaces it with a new image; therefore, it is important that
the download process not be interrupted once initiated. When the download
process is complete, the switch is reset automatically and the new software image
initiates a self-test. The self-test results are displayed briefly in the BayStack 350
switch Self-Test screen, which is followed by the CI screens.
completion without user intervention. The download process erases the contents
of flash memory and replaces it with a new image; therefore, it is important that
the download process not be interrupted once initiated. When the download
process is complete, the switch is reset automatically and the new software image
initiates a self-test. The self-test results are displayed briefly in the BayStack 350
switch Self-Test screen, which is followed by the CI screens.
During the download process, the BayStack 350 switch is nonfunctional. You can
monitor the progress of the download process by observing the BayStack 350
switch LED indications.
monitor the progress of the download process by observing the BayStack 350
switch LED indications.
Table 3-16.
Software Download screen fields
Field
Description
Image Filename The software image load file name.
Default Value
Zero-length string
Range
An ASCII string of up to 30 printable characters
TFTP Server IP
Address
Address
The IP address of your TFTP load host.
Default Value
0.0.0.0 (no IP address assigned)
Range
Four-octet decimal IP address notation, where each octet of the
address is represented as a decimal value, separated by a decimal
point
address is represented as a decimal value, separated by a decimal
point
Start TFTP
Load of New
Image
Load of New
Image
Specifies whether to start the download of the switch software image (default is No).
Use the space bar to toggle the selection to Yes.
Press [Return] to initiate the software download process.
Note:
The software download process can take up to 60 seconds to complete (or more
if the load host path is congested or there is a high volume of network traffic).
To ensure that the download process is not interrupted, do not power down the switch for
approximately 10 minutes.
approximately 10 minutes.
Default Value
No
Range
Yes, No
350fbk.book Page 49 Wednesday, July 9, 1997 4:51 PM