Bay Technical Associates 350 用户手册
893-00992-B
2-1
Chapter 2
Installation
Overview
This chapter explains how to install the BayStack 350 10/100 Autosense Switch.
The switch can be placed on a tabletop or shelf, mounted on a wall, or installed in
a 19-inch equipment rack.
The switch can be placed on a tabletop or shelf, mounted on a wall, or installed in
a 19-inch equipment rack.
To install the BayStack 350 switch, you unpack the equipment, physically install
the switch, connect the network cables, connect the power, and then verify the
installation.
the switch, connect the network cables, connect the power, and then verify the
installation.
Required Tools and Materials
You will need the following tools to install the BayStack 350 switch:
•
For installation in a standard 19-inch equipment rack, use a Phillips (or
cross-head) screwdriver.
cross-head) screwdriver.
•
For wall mounting, you need four screws (not supplied). The screw size and
type depends on the composition of the wall on which you intend to mount the
switch. Have an experienced maintenance person choose the appropriate
hardware for your wall composition.
type depends on the composition of the wall on which you intend to mount the
switch. Have an experienced maintenance person choose the appropriate
hardware for your wall composition.
Caution:
The screws and wall composition must be able to withstand the
weight of the device, plus the additional weight of the attached network cables
and power cords.
and power cords.
350fbk.book Page 1 Wednesday, July 9, 1997 4:51 PM