Bay Technical Associates 350 用户手册
Using the BayStack 350 10/100 Autosense Switch
2-6
893-00992-B
Attaching the Mounting Bracket
Figure 2-2 shows the mounting-bracket positions for mounting the BayStack 350
switch on a flat surface such as a tabletop, shelf, or wall. When rack mounting the
switch, you use the same brackets, but position them to attach to the
rack-mounting holes in the chassis (Figure 2-5).
switch on a flat surface such as a tabletop, shelf, or wall. When rack mounting the
switch, you use the same brackets, but position them to attach to the
rack-mounting holes in the chassis (Figure 2-5).
To attach the mounting brackets for a surface mount, follow these steps:
1.
2.
Using a Phillips (or cross-head) screwdriver, attach a mounting bracket
to each side of the switch using the screws supplied with the unit.
to each side of the switch using the screws supplied with the unit.
3.
Secure the switch to the tabletop, shelf, or wall as described in the
appropriate section.
appropriate section.
Figure 2-2.
Attaching the mounting brackets for a surface mount
350T
10/100 Autosense Switch
585FA
350fbk.book Page 6 Wednesday, July 9, 1997 4:51 PM