Baumatic B620MC 用户手册

 

11

o

 

When the oven is connected to your mains supply for the first time 
(or after a power cut), the digits on the LED display (7) will show 

“0:00” and there will be an audible signal. 

 

 on the LED display. 

 

 to confirm the time of day. 

 

o

 

l 

e any residue from the oven that may have been left from 

oven function and set the thermostat to its maximum temperature 

 

mell to be produced during this process. 

s is taking place. 

s should be used. 

 

o

 

Press the clock button (3) and the hour digits will flash on the LED
display. 

 

o

 

Turn the adjustment knob (6) to adjust the hour time. Your oven 
has a 24 hour clock, so it is possible to adjust the hour digit 
between 0 and 23. 

 

o

 

When the correct hour time appears on the LED display, press the 
clock button again. The minute digits will flash

 

o

 

Turn the adjustment knob to adjust the minute time; it is possible
to adjust the minute digit between 0 and 59. 

 

o

 

When the correct minute time appears on the LED display, press 
the clock button for a third time

The “:” symbol between the digits will flash and the time of day wil
light on the LED display. 

 

 
 

 

 

To remov

o

the manufacturing process, you should select the convection & fan 

setting.  

 

It is perfectly normal for a s

o

o

 

You should make sure that any windows in the room are left open 
during this process. 

o

 

It is advisable for you not to remain in the room whilst the burning 
off proces

o

 

You should leave the oven on maximum setting for 30 – 40 
minutes. 

o

 

After the oven cavity has cooled, it should then be cleaned with 
warm soapy water, using either a sponge or soft cloth. No abrasive 
cleaner