Barracuda Networks 4 用户手册
Getting Started 17
4.
Enter the IP Address, Netmask, Default Gateway, Primary DNS Server and Secondary DNS
Server (optional) as appropriate for your network.
Server (optional) as appropriate for your network.
5.
Click Enter on the
Commit Changes
box.
If the Barracuda Backup Server is not able to connect to the Internet using the assigned address, it will
switch to Smart-mode. When in Smart-mode, the Barracuda Backup Server discovers an unused IP
address in its subnet and uses that address. This is intended to be a temporary measure of establishing
network connectivity. Once the connectivity issue is resolved, the DHCP/Static field should be
changed to DHCP or static IP address using the console administration interface.
switch to Smart-mode. When in Smart-mode, the Barracuda Backup Server discovers an unused IP
address in its subnet and uses that address. This is intended to be a temporary measure of establishing
network connectivity. Once the connectivity issue is resolved, the DHCP/Static field should be
changed to DHCP or static IP address using the console administration interface.
The LAN and Internet boxes on the console administration interface will be green when the Barracuda
Backup Server is determined to be online. The Barracuda box will remain red until it is linked to an
account later in the installation process.
Backup Server is determined to be online. The Barracuda box will remain red until it is linked to an
account later in the installation process.
Creating an Account
You must have a Barracuda Networks account to use the Barracuda Backup Service. If you already
have a Barracuda Networks account, skip to the next step.
have a Barracuda Networks account, skip to the next step.
If you do not already have an account, follow these steps:
1.
Go to the following URL:
2.
Complete the fields on the
Create New Account
page and click Submit.
Linking Your Barracuda Backup Server to an Account
Your Barracuda Backup Server must be linked to your Barracuda Networks account before you can
initiate data backups.
initiate data backups.
To link your Barracuda Backup Server to your Barracuda Networks account:
1.
Go to this URL:
2.
Sign in with your Username and Password.
3.
If the Barracuda Backup Service is your default or only Barracuda Networks product, then the
Barracuda Backup Service Web interface appears. If not, click Backup Service at the top of the
screen.
Barracuda Backup Service Web interface appears. If not, click Backup Service at the top of the
screen.
4.
Click Start Backup Service Setup, and then select the
STATUS
tab.
5.
Click Link a Barracuda Backup Server.
6.
Enter your Serial Number and Linking Code from the sticker attached to the Quick Start
Guide that shipped with your Barracuda Backup Server. These values are case sensitive. The
Serial Number can also be found on a sticker on the back of the unit. Follow the on-screen
prompts to complete linking and to supply your account information.
The linking process could take a few minutes to complete. Wait until the
Guide that shipped with your Barracuda Backup Server. These values are case sensitive. The
Serial Number can also be found on a sticker on the back of the unit. Follow the on-screen
prompts to complete linking and to supply your account information.
The linking process could take a few minutes to complete. Wait until the
STATUS
page
appears, indicating that the Barracuda Backup Server was successfully linked to your account. A
green light next to the Barracuda Backup Server on the
green light next to the Barracuda Backup Server on the
STATUS
page indicates that your
Barracuda Backup Server has successfully connected.