Boss Audio Systems BR-1600CD 用户手册
133
Using the Mastering Tool Kit
Section 2
Performing automatic fade-out
(Auto Fade Out)
(Auto Fade Out)
1.
Confirm that “FX:ON” is displayed in the Mastering
Tool Kit top screen.
Tool Kit top screen.
If “FX:OFF” is displayed, press [F1] (OFF=>ON) to
display “FX:ON.”
display “FX:ON.”
fig.36-10d
2.
Move the cursor to “AUTO FADE OUT” and select
“ON” with the TIME/VALUE dial.
“ON” with the TIME/VALUE dial.
3.
Press [F3] (AUTO FADE).
The Auto Fade Out setting screen will appear.
fig.36-11d
4.
Move the cursor to the setting you want to change and
select a new value using the TIME/VALUE dial.
select a new value using the TIME/VALUE dial.
START:
This parameter sets the start time for fade out.
LENGTH:
The parameter sets the time (in seconds) from the start of
fade-out until the volume reaches zero.
fade-out until the volume reaches zero.
• If the end point of the song is positioned before the point
corresponding to START + LENGTH, the song will end
abruptly mid-way through fade-out. Adjust the START
and LENGTH settings to ensure that the volume
smoothly reduces to zero before the end of the song.
abruptly mid-way through fade-out. Adjust the START
and LENGTH settings to ensure that the volume
smoothly reduces to zero before the end of the song.
• When the current position is after the point
corresponding to START + LENGTH, you will not be
able to hear the BR-1600CD’s playback as the volume
will be set to zero.
able to hear the BR-1600CD’s playback as the volume
will be set to zero.
CURVE:
This parameter sets the shape of the volume reduction
curve during fade-out.
curve during fade-out.
A
The volume will be perceived as being reduced at a
steady rate.
steady rate.
B
The volume will be perceived initially as dropping
at a slower rate, and this rate will increase as the
fade-out progresses.
at a slower rate, and this rate will increase as the
fade-out progresses.
5.
Press [EXIT/NO] to return to the Mastering Tool Kit
patch screen.
patch screen.
6.
Move the current position to before the START point
and begin playback.
and begin playback.
When the current position reaches the START point, the
fade-out will begin.
fade-out will begin.
If you wish to store the Auto Fade In/Out settings,
save the current song (p. 72). Unless the song is
saved, any new settings will be lost when the power
is turned off or a new song is loaded.
save the current song (p. 72). Unless the song is
saved, any new settings will be lost when the power
is turned off or a new song is loaded.
BR-1600_R_e.book 133 ページ ２００７年１２月６日 木曜日 午前９時５２分