Boss Audio Systems BR-1600CD 用户手册

下载
页码 312
 
215
Copying and writing waveform data
 
Section 4
 
Setting the time until the CD-R/
 
RW drive stops (CD Hold Time)
 
Whenever the BR-1600CD’s CD-R/RW drive is used to read 
or write data, the drive’s internal motor will continue to spin 
for a specific period of time after this process has been 
completed. In situations where this becomes a hindrance to 
the music making process, you can set a new duration for the 
spinning down of the motor.
 
1.
 
Press [UTILITY].
 
The Utility Menu screen will appear.
 
fig.12-12d
 
2.
 
Move the cursor to the SYSTEM icon and press 
[ENTER/YES].
 
Alternatively, you can press [F1] (SYSTEM) if the 
SYSTEM icon is currently displayed. 
The System Parameter screen will appear.
 
fig.10-03d
 
3.
 
Move the cursor to “CD Hold Time” and set a suitable 
time using the TIME/VALUE dial. 
 
fig.41-34d
 
The CD hold time can be set within a range of 1 second 
to 32 minutes. At the time of purchase, the hold time will 
be set to 32 seconds.
Once the CD-R/RW drive’s motor has stopped, a 
certain amount of time will be required for it to 
reach a stable operating speed the next time data 
needs to be read or written. If the reading and 
writing of data will be carried out frequently, you 
should set a longer hold time to ensure that the 
drive’s motor does not stop between each operation.
BR-1600_R_e.book 215 ページ 2007年12月6日 木曜日 午前9時52分