Boss Audio Systems BR-1600CD 用户手册
252
Loading WAV/AIFF files in BR-1600CD tracks (WAV/AIFF Import)
You can take WAV or AIFF files on your computer, such as
files created with audio software applications, and load them
to the BR-1600CD’s tracks.
files created with audio software applications, and load them
to the BR-1600CD’s tracks.
●
Wave data in the following formats can be imported.
You cannot import wave data in other formats.
• WAV or AIFF format
• Mono or Stereo
• 8-bit or 16-bit
• Sampling Rate: 44.1 kHz
●
Add the extension “WAV” to imported WAV files and
the extension “AIF” to imported AIFF files.
the extension “AIF” to imported AIFF files.
●
Compressed WAV files or AIFF files cannot be loaded.
●
Extremely short waveform data (less than approximately
1 sec) cannot be loaded.
1 sec) cannot be loaded.
●
The loop point settings within an AIFF file will be
ignored.
ignored.
With Windows
1.
Connect your computer and the BR-1600CD with a USB
cable.
cable.
2.
Confirm that the recorder is stopped, then press
[UTILITY].
[UTILITY].
The Utility Menu screen will appear.
fig.12-12d
3.
Move the cursor to the USB icon and press [ENTER/
YES].
YES].
Alternatively, you can press [F4] (USB) if the USB icon is
currently displayed.
currently displayed.
The USB screen will appear.
fig.52-05d
4.
Move the cursor to the IMPORT icon and press
[ENTER/YES].
[ENTER/YES].
Alternatively, you can press [F3] (IMPORT).
The USB Import screen will appear.
fig.52-22d
5.
Use [CURSOR] and the TIME/VALUE dial to select the
track and the V-Track to be loaded.
track and the V-Track to be loaded.
When loading to the tracks in mono
Select the track 1–8.
fig.52-23d
When loading to the tracks in stereo
Select the track combination 1/2–15/16.
fig.52-24d
6.
Use [CURSOR] and the TIME/VALUE dial to specify
the measure or position in the track from which
loading is to start.
the measure or position in the track from which
loading is to start.
Pressing [F1] (DISP.FMT.) at this time will allow you
switch among the specification methods for positions
(i.e., by bar, time, or marker).
switch among the specification methods for positions
(i.e., by bar, time, or marker).
fig.52-25d
7.
Press [F4] (GO).
When the connection is complete, the message “Copy 1
Wave File In Computer To BR-1600CD’s USB Folder”
will appear.
After several moments, the BR-1600CD icon or the
“Removable Disk (*:)” icon will appear on the PC monitor.
Wave File In Computer To BR-1600CD’s USB Folder”
will appear.
After several moments, the BR-1600CD icon or the
“Removable Disk (*:)” icon will appear on the PC monitor.
fig.52-07
8.
Click the BR-1600CD icon or the “Removable Disk (*:)” icon.
The files and folders from the BR-1600CD’s hard disk
will be displayed on the PC monitor.
will be displayed on the PC monitor.
In some cases, a certain amount of time will pass before
the hard disk is displayed.
the hard disk is displayed.
BR-1600CD
Removable Disk (*:)
(Ex.)
BR-1600_R_e.book 252 ページ ２００７年１２月６日 木曜日 午前９時５２分