Boss Audio Systems BR-1600CD 用户手册
81
Using insert effects
Section 2
Saving insert effect settings
(Effect Patch Write)
Modified effect settings are saved by writing them together
with a new patch name.
with a new patch name.
1.
Press [F1] (NAME) on the Effects Edit screen.
fig.31-05d
2.
Move the cursor to the characters in the patch name you
want to change and select new characters using the
TIME/VALUE dial.
want to change and select new characters using the
TIME/VALUE dial.
At this time, the FUNCTION buttons operate as follows.
[F1] (INSERT):
An empty space of one character in length will be
inserted.
inserted.
[F2] (DELETE):
A single character will be deleted.
[F3] (123...):
The character type will switch to numbers.
[F4] (A<=>a):
The character type will toggle between uppercase and
lowercase.
lowercase.
3.
Press [EXIT/NO] to return to the Effects Edit screen.
4.
Press [F4] (WRITE/COPY).
The Effects Patch Write/Copy screen will appear.
fig.31-06d
5.
Move the cursor to the “TO:” field and select a
destination patch using the TIME/VALUE dial.
destination patch using the TIME/VALUE dial.
fig.31-07d
FROM:
This field should be left unchanged at
“*TMP(CURRENT)” If a different message is displayed,
however, move the cursor to this field and turn the
TIME/VALUE dial counterclockwise to restore
“*TMP(CURRENT).”
“*TMP(CURRENT)” If a different message is displayed,
however, move the cursor to this field and turn the
TIME/VALUE dial counterclockwise to restore
“*TMP(CURRENT).”
TO:
This field sets the effect patch to which your new settings
are to be written. Whenever you call up the Effects Patch
Write/Copy screen, the cursor will be automatically
positioned here. Note that you can also move the cursor
to the bank field and turn the TIME/VALUE dial to
select a new destination bank.
are to be written. Whenever you call up the Effects Patch
Write/Copy screen, the cursor will be automatically
positioned here. Note that you can also move the cursor
to the bank field and turn the TIME/VALUE dial to
select a new destination bank.
6.
Press [F4] (GO).
The effect patch will be written. When finished, the
message “Complete!” will appear and the display will
automatically return to the Effects Patch screen. If you
selected a different destination bank than that specified
with the INPUT SELECT button, this new bank selection
will be maintained after writing has been completed.
message “Complete!” will appear and the display will
automatically return to the Effects Patch screen. If you
selected a different destination bank than that specified
with the INPUT SELECT button, this new bank selection
will be maintained after writing has been completed.
7.
Press [EXIT/NO] several times to return to the top
screen.
screen.
BR-1600_R_e.book 81 ページ ２００７年１２月６日 木曜日 午前９時５２分