Boss Audio Systems BR-1600CD 用户手册

下载
页码 312
 
96
Insert effect parameter functions
 
Speaker Type
Mic Setting
CENTER, 1 cm–10 cm
 
This simulates the microphone position. “CENTER” simulates the 
condition that the microphone is set in the middle of the speaker 
cone. “1-10 cm” means that the microphone is moved away from the 
center of the speaker cone.
 
Mic Level
0–100
 
Adjusts the volume of the microphone.
 
Direct Level
0–100
 
Adjusts the volume of the direct sound.
 
*
When the FULLRNG type of preamp has been selected, “Mic Level” 
should be set to 100, and “Direct Level” should be set to 0.
 
Amb Pre-Dly
0.5 ms–50.0 ms
 
This parameter adjusts the delay between the original sound and the 
output of ambience (i.e., room reflections).
 
Amb Size
5.0 m–15.0 m
 
This parameter adjusts the sound of the ambience by varying the 
room size. Larger values produce longer ambience and increase the 
sense of spaciousness.
 
Amb Density
0–10
 
This parameter adjusts the density of the ambience. Larger values 
produce a denser sound.
 
Amb HF Damp
DARK, NORMAL, BRIGHT
 
This parameter adjusts the tone of the ambience. 
 
DARK:
 
High frequencies decay relatively quickly, producing a darker 
sounding ambience.
 
NORMAL:
 
This setting produces ambience with a standard sound.
 
BRIGHT:
 
High frequencies decay relatively slowly, producing a brighter 
sounding ambience.
 
Amb Level
0–100
 
Adjusts the volume of ambience.
 
De-esser
 
This effect is useful for reducing sibilance (or harsh ‘S’ 
sounds) produced by vocalists.
 
Effect On/Off
OFF, ON
 
This parameter turns the de-esser effect on or off.
 
Sibilant Level
0–100
 
This adjusts the sensitivity with respect to the input volume, and it 
controls the way in which the effect is applied.
 
Level
0–100
 
Adjusts the overall volume of the effect.
 
Defretter
 
This effect simulates the sound of a fretless bass.
 
Effect On/Off
OFF, ON
 
This parameter turns the defretter effect on or off.
 
Sensitivity
0–100
 
This controls the input sensitivity of the defretter. Adjust this 
parameter until your guitar’s harmonic changes sound natural.
 
Attack
0–100
 
This parameter controls the attack of the defretter. Increasing the value 
will cause the harmonics to change more slowly, thus producing a 
relatively attack-less sound, similar to that of a fretless bass.
 
Depth
0–100
 
This controls the ratio of harmonics. Increasing the value will increase the 
harmonic content and therefore will create a more unusual sound.
 
 
 When “COSM OD GUITAR AMP” 
algorithm is selected
Tone
-50–+50
 
Adjusts the amount of blurring between the notes.
 
Resonance
0–100
 
Adds a characteristically resonant quality to the sound.
 
Effect Level
0–100
 
Adjusts the volume of the defretter sound.
 
Direct Level
0–100
 
Adjusts the volume of the direct sound.
 
 
 When algorithm other than “COSM OD 
GUITAR AMP” is selected
Level
0–100
 
Adjusts the volume of the defretter sound.
 
1x10”
 
This is a compact open-back speaker 
cabinet with one 10-inch speaker.
 
1x12”
 
This is a compact open-back speaker 
cabinet with one 12-inch speaker.
 
2x12”
 
This is a general open-back speaker cab-
inet with two 12-inch speakers.
 
4x12”
 
This is an optimal speaker cabinet for a 
large enclosed amp with four 12-inch 
speakers.
 
8x12”
 
This is a double stack of two cabinets, 
each with four 12-inch speakers.
 
ORG
 
This is the built-in speaker of the amp 
you selected with “Type.”
BR-1600_R_e.book 96 ページ 2007年12月6日 木曜日 午前9時52分