Bosch Appliances Light Therapy Device FPA-1200-MPC-C 用户手册

en

MPC-xxxx-C / FPA-1200-MPC-C

F.01U.258.925 | 2.0 | 2012.04

Bosch Sicherheitssyteme GmbH

The connection to a Building Management System (BIS) is done via an OPC server and the 
Ethernet 100BaseTX interface. For a multiple-building network, you must check with the 
network adminstrator if


the network is designed for multiple-building connections (e.g. no technical interference 
by varying ground potentials)



the bus users are designed for the network

Address Setting and Configuration
1.

Assign a unique physical address to each Panel Controller and Remote Keypad by setting 
the rotary switches and write it down on the label (Step 1 and 2, Figure 7, Page 9).
Make sure that the redundant panels do have identical addresses.

2.

For configuration, set the 6-pin DIP switch (Step 3, Figure 7, Page 9).

3.

Mark the setting on the provided label (Step 4).

Note the DIP switch and address settings for the stand-alone and redundant configuration 
(Figure 9, Page 10).

DIP 6 on the Panel Controller of the FPA-1200 is inoperable, as it cannot be operated as a 
redundant panel.

LCD display / touch screen

320 x 240 pixels / 127.5 mm x 170 mm active surface

Operating and display elements

22 keys, 1 key switch, 11 LEDs, 1 reboot button

Interfaces

CAN1, CAN2, ETH1, ETH2, USB, RS232

Signal inputs

IN1/IN2

Max. CAN cable length in networks

L

max

 = 1000 m, depending on configuration, cable type and topology

Input voltage

20 V DC to 30 V DC

Power supply PRS 0002 A

+5 V DC ±4.5 %  /  max. 500 mA

Max. current consumption

-

Standby: 135 mA at 24 V DC

-

During alarm: 225 mA at 24 V DC

Permissible operating temperature

-5 °C to +50 °C

Permissible storage temperature

-20 °C to +70 °C

Dimensions (H x W x D)

190 mm x 404 mm x 60 mm

Weight

Approx. 2 kg