Biostar P4M800 用户手册
P4M800 Pro-M7
12
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 H
OW TO
S
ETUP
J
UMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin
opened Pin
closed
Pin1-2
closed
3.2 D
ETAIL
S
ETTINGS
JUSBV1/JUSBV2: Power Source Headers for USB ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSB1 and JUSBLAN1.
JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3).
JUSBV2: +5V for USB ports at front panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV1: USB ports at JUSB1 and JUSBLAN1 are powered by +5V
standby voltage.
JUSBV2: USB ports at front panel (JUSB2/JUSB3) are powered by +5V
standby voltage.
3
1
3
1
Pin 1-2 Close (Default)
JUSBV1
1
3
JUSBV2
1
3
3
1
3
1
Pin 2-3 Close
Note:
In order to support this function “Power-On system via USB device,” “JUSBV1/ JUSBV2”
jumper cap should be placed on Pin 2-3 individually.
jumper cap should be placed on Pin 2-3 individually.