Benq Thermometer sp870 用户手册
24
Operation
Eng
lish
lish
Utilizing the password function
For security purposes and to help prevent unauthorized use, the projector includes an option for setting up
password security. The password can be set through the On-Screen Display (OSD) menu.
password security. The password can be set through the On-Screen Display (OSD) menu.
You will be inconvenienced if you activate the password functionality and subsequently forget the
password. Print out this manual (if necessary) and write the password you used in this manual, and keep
the manual in a safe place for later recall.
password. Print out this manual (if necessary) and write the password you used in this manual, and keep
the manual in a safe place for later recall.
Setting a password
Once a password has been set and the power on lock is activated, the projector cannot be used unless the
correct password is entered every time the projector is started.
correct password is entered every time the projector is started.
1.
Open the OSD menu and go to the SYSTEM SETUP: Advanced > Security Settings menu. Press ENTER on
the projector or remote control. The Security Settings page displays.
the projector or remote control. The Security Settings page displays.
2.
Highlight Power On Lock and select On by pressing /
.
3.
As pictured to the right, the four arrow keys ( ,
, , ) respectively
represent 4 digits (1, 2, 3, 4). According to the password you desire to
set, press the arrow keys to enter six digits for the password.
set, press the arrow keys to enter six digits for the password.
4.
Confirm the new password by re-entering the new password.
Once the password is set, the OSD menu returns to the Security Settings
page.
Once the password is set, the OSD menu returns to the Security Settings
page.
The digits being input will display as asterisks on-screen. Write your
selected password down here in this manual in advance or right after the
password is entered so that it is available to you should you ever forget
it.
selected password down here in this manual in advance or right after the
password is entered so that it is available to you should you ever forget
it.
Password: __ __ __ __ __ __
Keep this manual in a safe place.
5.
To leave the OSD menu, press MENU/EXIT.
If you forget the password
If the password function is activated, you will be asked to enter the six digit
password every time you turn on the projector. If you enter the wrong
password, the password error message as pictured to the right displays lasting
for three seconds, and the INPUT PASSWORD message follows. You can retry
by entering another six-digit password, or if you did not record the password
in this manual, and you absolutely do not remember it, you can use the
password recall procedure. See
password every time you turn on the projector. If you enter the wrong
password, the password error message as pictured to the right displays lasting
for three seconds, and the INPUT PASSWORD message follows. You can retry
by entering another six-digit password, or if you did not record the password
in this manual, and you absolutely do not remember it, you can use the
password recall procedure. See
for details.
If you enter an incorrect password 5 times in succession, the projector will
automatically shut down in a short time.
automatically shut down in a short time.
INPUT NEW PASSWORD
Back
MENU
Password Error
Please try again.