Beacon Computer Lan Adapter 用户手册
Utilities
4-6
2.
Once the parameters have been entered, click on
the Start button at the bottom of the dialog box to
start the link test. When the link test is running, nec-
essary statistics will be displayed and updated peri-
odically.
the Start button at the bottom of the dialog box to
start the link test. When the link test is running, nec-
essary statistics will be displayed and updated peri-
odically.
3.
To stop the link test, click on Stop, OK, or Cancel at
the bottom of the dialog box. Once the link test has
sent the number of packets specified, the Stop but-
ton will toggle back to a Start button.
the bottom of the dialog box. Once the link test has
sent the number of packets specified, the Stop but-
ton will toggle back to a Start button.
Site Survey
Site Survey provides information for signal strength,
signal quality, and overall link quality as well as display-
ing all associated Access Points.
signal quality, and overall link quality as well as display-
ing all associated Access Points.
Packets are sent to each associated Access Point and
echoed back. The signal strength associated to each
node is displayed. This screen is updated every 10
seconds.
echoed back. The signal strength associated to each
node is displayed. This screen is updated every 10
seconds.
Linkscope
Linkscope provides a graphical display of:
•
Signal Quality
•
Signal Strength
Linkscope determines the performance of the RF link
between a PC Card and an Aironet Access Point. Any
Windows 95, Windows 98, or Windows NT unit associ-
ated to an Aironet Access Point can run the linkscope
test.
between a PC Card and an Aironet Access Point. Any
Windows 95, Windows 98, or Windows NT unit associ-
ated to an Aironet Access Point can run the linkscope
test.