Bay Technical Associates BayTech DS62 用户手册

33 

 

 

The SNMP Trap Host is a trap management station that receives and processes traps. Traps are system 
alerts that the Baytech device generates when certain events occur. By default, no trap manager is 
defined, and no traps are issued. Up to four SNMP Trap Hosts maybe assigned to receive traps. Select 
a “SNMP Trap Host”, the DS will display the following, Default address is (0.0.0.0) for all Hosts. 

Community String: 
SNMP community strings authenticate access to MIB objects and function as embedded passwords. In 
order for your SNMP script/software to access the Baytech SNMP, the community string definitions 
on your SNMP script/software must match the Baytech SNMP string definitions. 

 

‘Read’—Gives read access to authorized management stations to all objects in the MIB except the 
community strings, but does not allow write access. 

 

‘Write’—Gives read and write access to authorized management stations to all objects in the MIB, but 
does not allow access to the community strings 

 

Select ‘SNMP Read Only Community’ option to enter a Read Community string, the DS displays the 
current setting, Default is public. 

 

Select ‘SNMP Read-Write Community’ option to enter a Write Community string, the DS displays the 
current setting, Default is private. 

 

 

Select the ‘SNMP Enable’ option to enable the SNMP function, the DS displays, Default is Enabled. 

 

 

  SNMP Trap Host 1 IP Address:  220.225.36.212 
  Enter new Trap Host IP Address: 
 
  SNMP Trap Host 2 IP Address:  70.154.96.10 
  Enter new Trap Host IP Address: 
 
  SNMP Trap Host 3 IP Address:  192.168.1.102 
  Enter new Trap Host IP Address: 
 
  SNMP Trap Host 4 IP Address:  192.168.2.136 
  Enter new Trap Host IP Address: