Bay Technical Associates BayTech DS62 用户手册

39 

Note: There will be no confirmation the groups have been deleted. Select option 1 from the 
Outlet Group Configuration to verify all outlet groups were deleted. 

 

This option allows the admin to flash upgrade the firmware to the Host module through an FTP client. 
The admin can upload the configuration file, make changes, and download back to the unit. This 
feature ensures multiple units will have the same configuration without having to manually configure 
each unit separately.  

NOTE: Contact Baytech Support for the instruction sheet and firmware upgrade file. 

This option must be enabled to upgrade the firmware via FTP. The DS unit will display the following, 
Default is Disabled: 

IMPORTANT: Do not type ‘Y’ unless you have received the instructions and firmware from 
Baytech’s Technical Support. If you typed ’Y’ and see the following below, turn power off 
than back on to the unit to close the firmware upgrade. 

 

At this point follow the instruction to FTP the firmware into the unit.