Bajaj Electricals DB30 用户手册

INSPECTION AND MAINTENANCE

CLUTCH CLEANING AND MAINTENANCE

 

After every 5 hour of use,   your clutch will need cleaning and lubrication.  If clutch 

becomes too dirty or has lack of lubrication,  the clutch will have a tendancy to stick.  This 

will cause the Mini-Bike to want to take off before throttle is applied.

 

To clean and lubricate clutch,  follow the instructions below:

1.   Make sure engine is turned off and engine is cool before removing clutch cover.

2.   Remove Clutch Cover

3.   With compressed air,  blow through holes to remove any dust and/or particles.

4.   Oil Clutch bearing with a few drops of  30W motor oil  

5.   Push Mini bike foreward without starting allowing oil to flow  through beaing surface.

6.    Re-install clutch cover

Oil Clutch here  ONLY

Blow out clutch with  compressed 

air through large holes

 

WARNING

Starting engine with clutch cover removed could be hazardous

Starting engine with clutch cover removed, increases the chance of getting your person 

caught in moving components which could result in severe injury.

Never start Mini Bike with clutch cover removed.

Clutch Cover