Baby Trend DELUXE TREND NURSERY CENTER 8207BCC 用户手册

下载
页码 11
CONTENTS (Fig. 1):
•  2 Long curved bars
•  2 Short bars with connector knobs
•  1 Changing area fabric
   
WARNING: 
Avoid serious injury or death:
•  Always use restraint belt to prevent falls
•  Use changer with infant who’s weight is less 
than 18 lbs (8.2 kg ) and is less than 25 inches 
(63.5 cm) tall.
•  Discontinue use of changer if infant can push 
up on hands and knees or sit unassisted. 
•  DO NOT carry changer with infant in it.
•  Always stay within arms reach of your child 
when using the changing area.
   
WARNING: 
Strangulation  Hazard  
Child  can  lift  the  changing  table  and  get 
neck  trapped  between  the  changing  table 
frame and the play yard frame.  Never leave 
the changing table in place when the child is 
in the bassinet or the play yard.  Always flip 
changer to the outside when not in use.
   
WARNING FALL HAZARD: 
To prevent death or serious injury, always 
keep child within arm’s reach.
ASSEMBLY
1.  Connect the two Long Curved Bars together as shown in figure 2.  
2.  Insert the assembled Curved Bars into the Changing Area Fabric 
such that the holes in the ends of the Curved Bars face downward 
as shown in Figure 3. 
3.  Slide the Curved Bars around inside the sleeve of the Changing 
Area Fabric.
4.  Connect the Short Bars with Connector Knobs to the Curved 
Bars as shown in figure 4.   When assembling the Short Bars with 
Connector Knobs make sure that the knobs will be facing inward 
when assembled and the snap buttons are facing downward.
Figure 2
Figure 3
Figure  4.
TO ASSEMBLE CHANGING AREA
Figure  5.
Figure 1
Holes face 
down
Completed assembly
 Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.
8