Whirlpool W10255468C 用户手册

■

Flexible metal vents are acceptable only if accessible for 
cleaning.

■

Flexible metal vent must be fully extended and supported when 
the dryer is in its final location. 

■

Remove excess flexible metal vent to avoid sagging and kinking 
that may result in reduced airflow and poor performance.

■

Do not install flexible metal vent in enclosed walls, ceilings, or 
floors.

■

The total length of flexible metal vent should not exceed 

 

7¾ ft. (2.4 m).

45° elbows provide better airflow than 90° elbows.

■

Use clamps to seal all joints. 

■

Exhaust vent must not be connected or secured with screws or 
other fastening devices that extend into the interior of the duct 
and catch lint. Do not use duct tape.

A and B: Recommended hood styles.

 

C: Acceptable hood style. 

     4"
(102 mm)

      4"
(102 mm)

   4"

■

An exhaust hood should cap the vent to keep rodents and 
insects from entering the home.

■

Exhaust hood must be at least 12" (305 mm) from the ground or 
any object that may be in the path of the exhaust (such as 
flowers, rocks, or bushes, snow line, etc.).

■

Do not use an exhaust hood with a magnetic latch.

Moisture damage to woodwork, furniture, paint, wallpaper, 
carpets, etc.

Housecleaning problems and health problems.

Typical installations vent the dryer from the rear of the dryer. Other 
installations are possible.

This dryer can be converted to exhaust out the right side, left side, or 
through the bottom. If you prefer, you may contact your local dealer 
to have the dryer converted.