Whirlpool W10309054B 用户手册

Clean the lint screen before each load. A screen blocked by 

lint can increase drying time.

Do not run the dryer with the lint screen loose, damaged, 

blocked, or missing. Doing so can cause overheating and 

damage to both the dryer and fabrics.
If lint falls off the screen into the dryer during removal, check 

the exhaust hood and remove the lint. 

1.  The lint screen is located in the front of the dryer. Pull the 

lint screen straight up to remove. Roll lint off the screen 

with your fingers. Do not rinse or wash screen to remove 

lint. Wet lint is hard to remove. 

2.  Push the lint screen firmly back into place.

1.  Roll lint off screen with your fingers.
2.  Wet both sides of lint screen with hot water.
3.  Wet a nylon brush with hot water and liquid detergent. 

Scrub lint screen with the brush to remove residue 

buildup.

4.  Rinse screen with hot water.
5.  Thoroughly dry lint screen with a clean towel. Insert lint 

screen back into dryer.

Keep your dryer as clean and fresh as your clothes.  

To keep dryer interior odor-free, follow this recommended 

monthly cleaning procedure:
1.  Apply a liquid, nonflammable household cleaner to the 

stained area of the drum and rub with a soft cloth until 

stain is removed.

2.  Wipe drum thoroughly with a damp cloth.
3.  Tumble a load of clean cloths or towels to dry the drum.
NOTE: Garments that contain unstable dyes, such as 

denim blue jeans or brightly colored cotton items, may 

discolor the dryer interior. These stains are not harmful to 

your dryer and will not stain future loads of clothes. Dry 

unstable dye items inside out to avoid transfer of dye.

Replace inlet hose after 5 years of use to reduce the risk of 

hose failure. Periodically inspect and replace inlet hoses if 

bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hose, mark the date of replacement 

on the label with a permanent marker.

The Touch Screen should be cleaned periodically to remove 

fingerprints or dust. 
1.  Make sure the dryer is OFF.
2.  Wipe the touch screen area with soft, damp cloth. 
3.  Wipe dry with clean, soft towel.
IMPORTANT: To avoid damaging the touch screen window,    

do not use chemicals or abrasive products.

Keep dryer area clear and free from items that would obstruct 

the flow of combustion and ventilation air.