Whirlpool Duet WED9500T 用户手册

■

For close-clearance installations between 31.5" (80.01 cm) 
and 37" (93.98 cm), see “Plan Vent System” section for 
venting requirements.

Mobile home installations require metal exhaust system hardware 
available for purchase from the dealer from whom you purchased 
your dryer. For further information, please refer to the “Assistance 
or Service” section of this manual. 

Are you placing the dryer on a pedestal? You have the option of 
purchasing pedestals of different heights separately for this dryer. 
You may select a 10" (25.4 cm) or 15.5" (39.4 cm) pedestal. 
These pedestals will add to the total height of the dryer for a total 
height of approximately 48" (121.9 cm) or 53.5" (135.9 cm), 
respectively.

For a garage installation, you will need to place the 10" (25.4 cm) 
pedestal at least 9" (22.9 cm) above the floor and the 
15.5" (39.4 cm) pedestal at least 3.5" (8.9 cm) above the floor.   

The pedestals are available in several colors. 

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. 

Are you planning to stack your DUET

®

 washer and dryer? To do 

so, you will need to purchase a Stack Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8541503.

Are you planning to reverse the door swing direction on your 
DUET

® 

dryer? To do so, you will need to purchase a Door 

Reversal Kit.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8579666.

If you are installing your DUET

®

 washer and dryer and wish to 

avoid having loose items fall behind your machines, you may 
purchase a pair of washer/dryer backguards. These will reduce 
the chance of items falling behind the machines during operation.

To order, call the dealer from whom you purchased your dryer or 
refer to the “Assistance or Service” section of this manual. Ask 
for Part Number 8212452 (White).

■

A location that allows for proper exhaust installation. See 
“Venting Requirements.”

■

A separate 30-amp circuit.

■

If you are using a power supply cord, a grounded electrical 
outlet located within 2 ft (61 cm) of either side of the dryer. 
See “Electrical Requirements.”

■

A sturdy floor to support the total dryer weight of 200 lbs 
(90.7 kg). The combined weight of a companion appliance 
should also be considered.

■

Cold water faucets located within 4 ft (1.2 m) of the dryer, and 
water pressure of 20-100 psi (137.9-689.6 kPa). You may use 
the cold water supply from your washer using the “Y” 
connector provided.

■

20-100 psi (138-690 kPa) for best performance.

White

WHP1000SQ

Biscuit

WHP1000ST

Diamond Dust 
(Silver)

WHP1000SU

Black

WHP1000SB

White

WHP1500SQ

Biscuit

WHP1500ST

Diamond Dust 
(Silver)

WHP1500SU

Black

WHP1500SB

A

B