Whirlpool 8535839 用户手册

下载
页码 28
7
DRYER USE
Starting Your Dryer
 
Before using your dryer, wipe the dryer drum with a damp cloth to 
remove dust from storing and shipping. The following steps 
provide an overview for operating your dryer. Specific directions 
for each step are provided in the following sections.
1.
Load clothes loosely into the dryer and close the door. Do not 
pack the dryer. Allow space for clothes to tumble freely.
2.
Turn the Cycle Control knob to the recommended cycle for 
the type of load being dried. Use the Energy Preferred Setting 
to dry most loads. See “Drying, Cycle and Temperature Tips.”
3.
Select a Temperature setting. See “Temperature Settings.”
4.
(OPTIONAL STEP) Set the WRINKLE SHIELD™ Plus selector 
to the desired setting. See “Additional Features.”
5.
(OPTIONAL STEP) Set the End of Cycle Signal to the desired 
setting. The signal is helpful when drying permanent press or 
synthetics. Promptly remove these items from the dryer at the 
end of the cycle to prevent wrinkles.
6.
Push the PUSH TO START button.
Stopping and Restarting 
You can stop your dryer any time during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE:
 The Cycle Control knob should point to an Off area when 
the dryer is not in use.
To restart your dryer
1.
Close the door.
2.
Select a new cycle and temperature (if desired).
3.
Push START.
Explosion Hazard
Keep flammable materials and vapors, such as 
gasoline, away from dryer.
Do not dry anything that has ever had anything 
flammable on it (even after washing).
Failure to follow these instructions can result in 
death, explosion, or fire.
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of 
oil on it (including cooking oils).
Items containing foam, rubber, or plastic must be 
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in 
death or fire.