Whirlpool ACC082XR0 用户手册

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.

In addition to the tools listed above, the following tools are 
needed for through-the-wall installation.

Check that all parts are included in parts package.

NOTE: Installation parts are supplied for double-hung windows 
up to 40" (101.6 cm) wide. A special Wide Window Kit is available 
from your dealer or service center. See “Accessories.”

IMPORTANT: Observe all governing codes and ordinances.

Check the location where air conditioner will be installed. Proper 
installation is your responsibility. Make sure you have everything 
necessary for correct installation.

The location should provide:

■

Grounded electrical outlet within 4 ft (122 cm) of where the 
power cord exits the air conditioner. 

NOTE: Do not use an extension cord.

■

Free movement of air in room to be cooled.

■

A large enough opening for the air conditioner.

■

Adequate wall support for weight of air conditioner. Air 
conditioner weighs between 80 and 110 lbs (36.3 to 49.9 kg).

NOTE: Cabinet louvers must not be obstructed. Air must be able 
to pass freely through the cabinet louvers.

Window opening measurements: 

■

Width: 27" (68.6 cm) minimum to 40" (101.6 cm) maximum. 

■

Height: 16

¹⁄₄" (41.3 cm) minimum.

To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow these basic precautions:

Unplug air conditioner before servicing.

Use two or more people to move and install air conditioner.

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

■

Flat-blade and Phillips 
screwdrivers

■

Level

■

Scissors

■

Tape measure

■

Drill and 

³⁄₃₂" or smaller bit

■

Saw

■

Wood preservative

■

Caulk

■

1" (2.5 cm) or thicker 
lumber

■

#8 x 

¹⁄₂" wood screws (6)

¹⁄₄

³⁄₄

³⁄₈

³⁄₈

B

C D

H

G

E

F

A

¹⁄₄

A

A

B