Whirlpool WED8500BR 手册

下载
页码 36
7
Items to refresh:
Cycle:
Temp:
Default 
Time:
Available 
Options:
Cycle Details:
Mixed Loads
Enhanced Touch 
Up
High
 
Medium
22
Wrinkle Prevent
Reduce Static
Extended high-heat drying cycle intended to 
help sanitize items such as bedding, towels, 
and baby wear. This cycle is not recommended 
for all fabrics. For best results, run cycle to 
completion, do not interrupt.
Shirts, blouses, and 
slacks
Quick Refresh (on 
some models)
High
12
Offers stepped drying starting with High heat, 
followed by Medium heat for enhanced fabric 
care and energy savings.
Items to dry:
Cycle:
Temp:
Default 
Time:
Available 
Options:
Cycle Details:
Small loads and 
sportswear
Quick Dry
High
 
Medium 
Low 
Extra Low 
Air Only
13
Wrinkle 
Shield
For small loads of 3-4 items
Any load  
NOTE: Select Air 
Only to dry foam, 
rubber, plastic, or 
heat-sensitive fabrics 
Timed Dry
High 
Medium
 
Low 
Extra Low 
Air Only
40
Use to dry items to a damp level for items that do not require 
an entire drying cycle. Select a drying temperature based 
on the type of fabrics in your load. If you are unsure of the 
temperature to select for a load, select the lower setting rather 
than the higher setting.
Small to medium 
loads
Touch Up (for 
non-steam 
models)
20
Use this setting to help smooth out wrinkles from such items as 
garments packed in a suitcase or garments wrinkled from being 
left in the dryer.
Cycle Guide – Manual Cycles
Settings and options shown in 
bold are default settings for that cycle. Not all features and cycles are available on all models.
Not all settings and options are available on each cycle. Default cycle times are estimated in minutes.
Cycle Guide – Steam Cycles
Settings and options shown in 
bold are default settings for that cycle. Not all settings and options are available on each cycle.  
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics. 
Adjusting drying time on Timed Dry Cycles
When you select a Timed Dry Cycle,  
the default time appears in the display.  
Use the Time Adjust buttons to increase  
or decrease the time in 1 minute  
increments. Press and hold to change  
the time in 5 minute increments. 
The maximum dry time is 90 minutes.
  Or Wrinkle Shield
 with Steam (on some models). Wrinkle Shield
 with Steam is available only with High and Medium Temp 
settings.
Selecting the Temp
A High heat setting may be used for drying heavyweight  
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying  
medium-weight items such as sheets, blouses, dresses,  
underwear, permanent press fabrics, and some knits.
Use a no-heat (Air Only) setting for foam, rubber, plastic,  
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures  
for various loads, refer to the care label directions.
  Or Wrinkle Shield
 with Steam (on some models). Wrinkle Shield
 with Steam is available only with High and Medium Temp 
settings.
Load Size Recommendations
For best results, follow the wet load size recommendations noted 
for each cycle. 
Small load: Fill the dryer drum with 3-4 items,  
not more than 1/4 full. 
Medium load: Fill the dryer drum up to about 1/2 full. 
Large load: Fill the dryer drum up to about 3/4 full.  
Do not overload. Items need to tumble freely.