Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. West Elm
  4. Modular Rectangle Table Top
  5. 组装说明

West Elm Modular Rectangle Table Top 组装说明

下载
页码 共 4
  
  
  
  
  
  
 
modular rectangle table top 
                                                                                                                         
 assembly instructions
Page 3 of 4 
2. Position two wide bookcases to make sure the distance between them match the distance 
between the two assembled metal brackets under the top. Carefully flip the top right side up 
with a helper and position the top on the two bookcases as shown below. Run three screws (B) 
on each bracket through the pre-drilled holes with a Philips head screw driver to attach the top 
to the bookcases.
With Option 2:
1. Lay top upside down on a soft surface to protect finish. Attach the metal bracket (A) to the 
table top by aligning the pre-drilled holes on the metal bracket with the pre-drilled holes on 
the under top frame as shown below. Run three screws (B) to hold the bracket to the under top 
frame with a Philips head screw driver.
2. Position the wide bookcase and the three drawer unit to make sure the distance between them 
matches the distance between the assembled metal bracket and wooden frame under the top. 
Carefully flip the top right side up with a helper and lift the bookcase and the three drawer unit 
as shown below. Make sure the under top frame sits properly in the opening of the top of the three 
drawer unit. Run three screws (B) through the pre-drilled holes in the metal bracket with a Philips 
head screw driver to hold the top to the bookcase. 
AB
B
B
A
8600751-3.26.09