West Elm Flat Stock Triple Sconce 组装说明
I
K
F
A
B
E
J
D
H
L
G
Important Safety Instructions:
·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling fixture.
·These instructions are provided for your safety. It is important that they are read carefully and completely
before assembling fixture.
•We strongly recommend that a professional electrician install all direct wire fixtures.
·This fixture has been rated for up to 3 x 40-watt TYPE B standard bulbs (not included). To avoid the risk
of fire, do not exceed the recommended wattage.
·This fixture has been rated for up to 3 x 40-watt TYPE B standard bulbs (not included). To avoid the risk
of fire, do not exceed the recommended wattage.
assembly instructions
flat stock triple sconce
9741406- 07/07
page 1 of 2
Parts Enclosed:
• Mounting plate (E)
• Canopy (G)
• Socket Ring (I)
• Metal Ring (J)
• Metal Plate (L)
• Shade (H)
• Mounting plate (E)
• Canopy (G)
• Socket Ring (I)
• Metal Ring (J)
• Metal Plate (L)
• Shade (H)
Hardware Included:
• (2) Mounting screws (D)
• (1) Green ground screw (B)
• (2) Plastic wire connectors (A)
• (2) Canopy Screws (F)
• (1) Wrench (K)
• (2) Mounting screws (D)
• (1) Green ground screw (B)
• (2) Plastic wire connectors (A)
• (2) Canopy Screws (F)
• (1) Wrench (K)
To install you will need:
• Electrical tape
• Screwdriver
• Electrical tape
• Screwdriver
Warning:
·To reduce the risk of fire, electrical shock or personal injury, always turn off lamp and allow it to
cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
·To reduce the risk of fire, electrical shock or personal injury, always turn off lamp and allow it to
cool prior to replacing light bulb.
·Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
·Keep flammable materials away from lit bulb.
Pre-assembly:
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
·For your safety and convenience, assembly by two people is recommended
·Remove all parts and hardware from box along with any plastic protective packaging.
·Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.
·For your safety and convenience, assembly by two people is recommended
Assembly Instructions:
1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER.
2. Carefully unpack all fixture parts and hardware and lay out on a clear workspace.
3. Carefully inspect the fixture wires. The NEUTRAL FIXTURE WIRE is white. The HOT FIXTURE WIRE is black.
The yellow-green wire or bare wire is the GROUND WIRE.
1. SHUT OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER.
2. Carefully unpack all fixture parts and hardware and lay out on a clear workspace.
3. Carefully inspect the fixture wires. The NEUTRAL FIXTURE WIRE is white. The HOT FIXTURE WIRE is black.
The yellow-green wire or bare wire is the GROUND WIRE.