Wasp Bar Code WPS100 用户手册
9-2
Wasp WPS100 Product Reference Guide
Using ADF Bar Codes
When you program a rule, make sure the rule is logically correct. Plan ahead before you
start scanning.
start scanning.
To program each data formatting rule:
•
Start the Rule. Scan the
•
Criteria. Scan the bar codes for all pertinent criteria. Criteria can include code type
(e.g., Code 128), code length, or data that contains a specific character string (e.g.,
the digits “129”). These options are described in
(e.g., Code 128), code length, or data that contains a specific character string (e.g.,
the digits “129”). These options are described in
•
Actions. Scan all actions related to, or affecting, these criteria. The actions of a
rule specify how to format the data for transmission. These options are described
in
rule specify how to format the data for transmission. These options are described
in
•
Save the Rule. Scan the
bar code on page 9-8. This places the rule in
the “top” position in the rule buffer.
•
If you make errors during this process, some special-purpose bar codes may be
useful: Erase Criteria and Start Again, Erase Actions and Start Again, Erase
Previously Saved Rule, etc.
useful: Erase Criteria and Start Again, Erase Actions and Start Again, Erase
Previously Saved Rule, etc.
on page 2-2 help guide you through the programming steps.
ADF Bar Code Menu Example
This section provides an example of how ADF rules are entered and used for scan data.
An auto parts distribution center wants to encode manufacturer ID, part number, and
destination code into their own Code 128 bar codes. The distribution center also has
products that carry UPC bar codes, placed there by the manufacturer. The Code 128 bar
codes have the following format:
destination code into their own Code 128 bar codes. The distribution center also has
products that carry UPC bar codes, placed there by the manufacturer. The Code 128 bar
codes have the following format:
MMMMMPPPPPDD
Where:
Where:
M = Manufacturer ID
P = Part Number
D = Destination Code
P = Part Number
D = Destination Code