Windsor 10080480 用户手册

86302100  CLIPPER DUO 05/08/08 

 
This carpet extractor is an electrical powered, 
portable carpet extractor intended for commercial 
use.  The appliance sprays a cleaning solution onto 
the carpet agitates the wet carpet, and then extracts 
the soiled solution back into the unit’s recovery tank.  
The appliance is fitted with and a hand tool for 
cleaning upholstery and stairs.

 

 
The machine is designed to maintain your carpet 
using the Encapsulating Interim Carpet Cleaning 
Process.  By using the Interim Carpet Maintainer in 
conjunction with Windsor Red Carpet Encapsulating 
Interim Cleaning (W450-4) or Encapsulating Interim 
Cleaning with Carpet Protection (W455-4) chemical 
solution, you can perform a regular light cleaning 
and grooming of your carpet very quickly, and have 
the carpet dry and ready for traffic within 30 minutes. 
 
The machine is also designed to restore your carpet 
using carpet extraction chemicals.  The machine is 
designed to apply cleaning solution onto carpeted 
floor, scrub the carpet with two counter-rotating 
brushes, and then vacuum the soiled water back into 
the recovery tank. 
 
The machine's primary systems are the solution 
system, scrub system, recovery system and operator 
control system. 
 
The function of the solution system is to store mixed 
solution and deliver solution to the appropriate spray 
jet.  The solution system consists of the solution 
tank, strainer, extraction pump and interim pump, 
solenoid valve, spray jets, accessory hand tool, and 
controls. The solution tank stores solution until it is 
delivered through the strainer to the appropriate 
pump. The solenoid valve allows flow from the 
extraction pump to the extraction nozzle or stops 
flow at the extraction nozzle so that the accessory 
hand tool can be used. The interim pump provides 
flow directly to the interim nozzle. The strainer 
protects the pump from debris.   The solution pumps 
control the cleaning solution flow. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
The function of the scrub system is to scrub the 
carpet, mix the cleaning solution with the soil and lift 
and groom the carpet pile.  The scrub system 
consists of two cylindrical brushes, motor, and 
controls.  The brushes scrub the carpet as the motor 
drives the brushes.  The counter-rotating action of 
the brushes grooms the carpet pile. 
 
The function of the recovery system is to vacuum the 
soiled water back into the recovery tank.  The 
recovery system consists of the vacuum shoe, 
vacuum motor, float ball filter, recovery tank and 
controls.  The vacuum shoe extracts the dirty 
solution from the carpet as the machine moves 
forward.  The vacuum motor provides suction to 
draw the dirty solution off the floor and into the 
recovery tank.  The float ball filter protects the 
vacuum fan from debris and foam.  The recovery 
tank stores the dirty solution. 
 
The function of the operator control system is to 
allow the operator to select the desired function to 
perform. 
 
CAUTION: This appliance is not suitable for picking 
up hazardous dust.