Whirlpool W10240879B - SP 用户手册

下载
页码 24
7
Additional Features
Estimated
On
Sensing
Wet
Damp
Cool 
Down
Done
Wrinkle
Shield
Control Lock
Remaining
Time
High
Medium
Low
Extra Low
Air Dry
More
Normal
Less
WRINKLE SHIELD™ Feature 
When you are unable to remove a load of clothes from the dryer 
as soon as it stops, wrinkles can form. The WRINKLE SHIELD™ 
feature periodically tumbles, rearranges, and fluffs the load to help 
keep wrinkles from forming.
Get up to 90 minutes of heat-free, periodic tumbling at the 
end of a cycle. Pressing the WRINKLE SHIELD™ button to 
turn ON or OFF at any time before the cycle has ended.
The WRINKLE SHIELD™ feature is preset to “OFF.” If selected 
for other cycles, the WRINKLE SHIELD™ feature setting will 
remain “ON” the next time that cycle is selected.
Signal 
The Signal produces an audible sound when the drying cycle is 
finished. Press the SIGNAL button to turn On or Off at any time 
before the cycle has ended. 
NOTE: When the WRINKLE SHIELD™ feature is selected and the 
Signal is on, an audible sound will be emitted every 20 minutes 
until the clothes are removed, or the WRINKLE SHIELD™ feature 
is finished.
Control Lock/Unlock
This feature allows you to lock your settings to avoid unintended 
use of the dryer. You can also use the Control Lock feature to 
avoid unintended cycle or option changes during dryer operation.
To enable the Control Lock feature when 
 
dryer is running: 
Press and hold the SIGNAL button for 3 seconds. The 
control is locked when a single beep is heard and the 
Control Lock status light is on.
 
To enable the Control Lock feature when dryer is OFF:
When the dryer is off, it is not necessary to press the POWER  
button before activating the Control Lock feature. 
To unlock:
Press and hold the SIGNAL button for 3 seconds to turn this 
feature off. 
NOTE: When the dryer is running and Control Lock is on, the 
dryer can be stopped by pressing the START/PAUSE button, 
 
but cannot be restarted until the control is unlocked.
Changing Cycles and  Settings
On Automatic Cycles, you can change the Cycle or Dryness Level 
at any time before pressing START/PAUSE. 
On Timed Cycles, you can change the Cycles, adjust the time, 
 
or change the temperature setting at any time before pressing 
START/PAUSE.
Three short tones sound if an unavailable combination is 
selected. The last selection will not be accepted.
Changing cycles after pressing START/PAUSE
1. Press POWER. This ends the current cycle.
2. Select the desired cycle and options.
3. Press and hold START/PAUSE. The dryer starts at the 
beginning of the new cycle.
NOTE: If you do not press Start within 5 minutes of selecting 
 
the cycle, the dryer automatically shuts off.
Changing settings on Timed Cycles during the cycle
On Timed Cycles, at any time, you may:
Adjust the time by pressing the More or Less Time buttons. 
Change the temperature setting by pressing the Temp button.
Retractable Hanging Rod
The retractable hanging rod may be used to hang several items of 
clothing. 
To open or close the hanging rod, push it in until you hear it click.